Brickcom Software Users Manual For Firmware release V3.2.x. Bedienungsanleitung PDF herunterladen (Seite 24)

Camera Control

Preset Point

A preset position is a pre-defined camera view that can be used to quickly move the

camera view to a specific location. To create a preset position:

a. Use the Pan, Tilt and Zoom (PTZ) controls to steer the camera view to the

required position.

b. Enter a descriptive name under Current Position and click Add.

c. The camera position and focus settings will be saved as a preset position.

NOTE – A total of sixteen preset points can be set.

a. Preset Positions can be assumed at any time by selecting the preset position's

name from the available positions drop-down list. One position can be set as the

Home position, which is readily accessible by clicking the Home button in the PTZ

panel.

NOTE - The name of the preset point set as Home will have (H) added; for

example, Gate (H).

b. The camera can be configured to return to the Home position when the camera

has been inactive for a specified length of time. Select the desired length of time from

the drop-down menu and click Apply. Setting the time to zero prevents the camera

from automatically returning to the Home position.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 71 72

Keine Kommentare

Brickcom Software Users Manual For Firmware release V3.2.x. Bedienungsanleitung Seite 24